Advanced Automation Systems in Oil & Gas Exploration: A Cross-Industry Perspective Using Tea Leaf Cutting Machine Innovations
DOI:
https://doi.org/10.62486/978-9915-9851-0-7_202634Keywords:
Tea leaf, Attachable battery, Cutting machines, Compact, Labour, ProductionAbstract
Tea is one of the most popular and inexpensive beverages in India, consumed daily by millions of people across the country. India has been cultivating tea for centuries, and today it stands as the second-largest producer of tea in the world, after China, while also being one of the biggest consumers. The production of tea involves carefully plucking tender leaves, which are then processed in factories and classified according to their quality. These factors have collectively led to a gradual decline in the overall production rate. To address these challenges, this project introduces a battery-powered tea leaf cutting machine. This machine operates using a rechargeable battery, making it portable, energy-efficient, and easy to handle compared to traditional harvesting methods. By reducing dependence on manual labour, it helps tea growers overcome labour shortages while maintaining productivity. The machine is particularly beneficial for small and medium-scale farmers who often cannot afford large-scale mechanized harvesters but still seek affordable solutions to increase efficiency. In addition, the adoption of such battery-powered technology promotes sustainable agricultural practices by reducing fuel dependency and ensuring eco-friendly operations. Overall, this innovation represents a step forward in modernizing tea cultivation. It not only enhances efficiency and reduces production losses but also provides an opportunity for farmers to improve profitability while maintaining the quality of tea production. The cross-industry view of the matter implies that the oil and gas sector, by adopting design strategies from the agricultural machinery sector, may be able to pave new ways for the creation of cheap, resilient and scalable automation solutions that are well suited to the local situation. These translational engineering moves can, therefore, indirectly speed up the innovation process in drilling automation, equipment health monitoring, and field robotics as well as being the additional safety and environmental benefits that come with their use in exploration.
References
[1]. Sandeep Gopinath C and et.al., "Design and development of a conceptual tea leaf harvesting machine"(2011), Volume 10, Issue 2, Sep (2011).
[2].Dr.D.Sangupandy,S.ArunSiva and et.al.,"Tea Leaf Harvester Using Solar Power"(2023),Volume 11, Issue 07, International Journal.
[3]. I Dewa Putu Eskasasnanda, "Mechanisation in tea plantation driving factors and its impact on sustainable"(2020), Volume 25, Nomoraass 1, Jan 2020, Hal 61-68.
[4]. Y. Han, H. R. Xiao and et.al., "Design and Evaluation of tea leaf-Plucking machine for improving quality of tea"(2011), Vol. 35(6): 979-986
[5]. Chia-Chang Wu," Developing Situation of Tea Harvesting Machines in Taiwan"(2015) Vol. 5, No. 6, 2015, 871-875
[6]. ABARNA.R, SUBASH.S and et.al., "Design and Fabrication of tea leaf machine" (2018), Vol-4 Issue-2 2018
[7]. Dr. Hemalatha J N, Manikanta M and et.al., "Implementation of Tea Harvester"(2020), Vol. 9 Issue 07, July-2020, International Journal.
[8]. Merab Mamuladze, "In tea picking machines,the prospect of using a new cutting machine"(2023).
[9]. A.S.Ragool Delcien, Shambhavi Shankar and et.al., "Tea Leaf Cutting Machine1" (2016), Volume -3, Issue -3, 2016
[10]. Yan Yang, Ivan V. Chicherin and et.al., "Design and research on servomechanism of tea plucking"(2024).
[11]. Yu Han and Hongru Xiao, "Research on Kinematics Model of Reciprocating Cutter with Arc-shaped Blade for Tea-leaf Picking" (2019).
[12]. Yu Han, Hongru Xiao and et.al., "Design and experiments of 4CJ-1200 self-propelled tea plucking machine"(2021), Vol. 14 No. 6.
[13]. A Sureshkumar. A, S. Muruganand, " Design and Development of Selective Tea Leaf Plucking Robot"(2014), Vol. 2, No. 2, 45-48.
[14]. P.J. Burgess, M.K.V. Carz and et.al., "Evaluation of simple hand-held mechanical systems for harvesting tea(CAMELLIA SINENSIS)" (2006).
[15]. M. A. Wijeratne, "Harvesting policies of tea (Camellia sinensis) for higher productivity and quality"(2003).
[16]. Ramaswamy Ravichandran and Ramaswamy Parthiban, "The impact of mechanization of tea harvesting on the quality of south Indian CTC teas" (1997).
[17]. Yu, R., Xie, Y., Li, Q., Guo, Z., Dai, Y., Fang, Z., & Li, J. (2024).” Development and experiment of an adaptive oolong tea harvesting robot based on visual localization Agriculture” (2013).
[18]. Wang, H., Gu, J., & Wang, M. (2023). “A review on the application of computer vision and machine learning in the tea industry. Frontiers in Sustainable Food Systems” (2023).
[19]. Zhang, L., & Zhang, H. (2019).” Real-time monitoring of optimum timing for harvesting fresh tea leaves based on machine vision. International Journal of Agricultural and Biological Engineering”, 6–9. https://doi.org/10.25165/j.ijabe.20191201.4123.
[20]. Chen, C., et al. (2022).” A YOLOv3-based computer vision system for identification of tea buds and the picking point. Computers and Electronics in Agriculture” 198, 107116.
[21] Lu, J., Yang, Z., Sun, Q., Gao, Z., & Ma, W. (2023). “A machine vision-based method for tea buds segmentation and picking point location used on a cloud platform. Agronomy”13(6), 1537.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 M. Vimal Raja, S. Sanjula, T. Vignesh, N. Hariprasanth, V. Sriram, Prabhu, Nurmamatov Mekhriddin Qahramonovich (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The article is distributed under the Creative Commons Attribution 4.0 License. Unless otherwise stated, associated published material is distributed under the same licence.
